Practice is the mother of learning. After studying your text books and learning of the theory for the CCNA program, the best approach to assimilate and reinforce your knowledge is to solve many practical issues and mock exams of study. This article provides ten practice questions that focus on a wide range of topics that you need to learn to pass your CCNA exam.
Question 1: Which of the following CLI requires indicates that you are working in privileged EXEC mode?
A. host name>
B. Host Name #
C. host-config
D. exec-host>
Answer: B
Question 2: What command you type to save the configuration stored in RAM to NVRAM?
ANSWER: copy running-config startup-config
Question 3: What information does the show display the vlan commands?
A. ports that are configured as trunks
configuration parameters B. VMPS server
C. VLAN names and ports that are assigned to VLAN
D. VTP domain parameters
ANSWER: C
Question 4: What are the two characteristics of OSPF? (Choose two.)
A. Owner
B. Similar to RIP
C. hierarchical
D. Open Standards
E. Distance Vector Protocol
RESPONSE : C, D
Question 5: the command you can type to the router prompt to verify the transmission frequency for IGRP?
ANSWER: show ip protocols
Question 6: What command is used, and in what context, to stop routing updates out serial 0 interface of a router?
ANSWER: Router (config-router) # passive-interface S0
QUESTION 7: Which subnet mask would be appropriate for a Class C address used to nine networks LAN, each with 12 host?
255 255 255 252 A.
255 255 255 240 B.
C. 255 255 255 224
D. 255.255.255.0
Answer: B
QUESTION 8: which command correctly specifies that 10.0.0.0 network is directly connected to a router running EIGRP?
A. Router (config-router) # network 10.0.0.0
B. Router (config-router) # router eigrp 10.0. 0.0
C. Router (config) # network 10.0.0.0
D. Router (config) # router eigrp 10.0.0.0
ANSWER:
QUESTION 9 : what does a switch do when a frame is received on an interface and the hardware destination address is unknown or not in the filter table?
ANSWER: The switch floods the network with the frame trying to ensure that the device receives the frame.
Question 10: Which protocol is used to find the hardware address of a local device?
ANSWER: Address Resolution Protocol (ARP)
0 Komentar